unisonic technologies co., ltd dta115t pnp silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r206-062,ba digital transistors (built- in bias resistors) ? features * built-in bias resistors that im plies easy on/off applications. * the bias resistors are thin-film resistors with complete isolation to allow positive input. ? equivalent circuit ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 DTA115TL-AE3-R dta115tg-ae3-r sot-23 e b c tape reel note: pin assignment: e: emitte r b: base c: collector ? marking
dta115t pnp silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r206-062,ba ? absolute maximum ratings (t a =25c) parameter symbol rating unit collector-base voltage v cbo -50 v collector-emitter voltage v ceo -50 v emitter-base voltage v ebo -5 v collector current i c -100 ma collector power dissipation p c 200 mw junction temperature t j +150 storage temperature t stg -55~+150 note absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical specifications (t a =25c) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =-50 a -50 v collector-emitter breakdown voltage bv ceo i c =-1ma -50 v emitter-base breakdown voltage bv ebo i e =-50 a -5 v collector-emitter satu ration voltage v ce ( sat ) i c =-1ma, i b =-0.1ma -0.3 v collector cutoff current i cbo v cb =-50v -0.5 a emitter cutoff current i ebo v eb =-4v -0.5 a dc current gain h fe v ce =-5v, i c =-1ma 100 250 600 input resistance r 1 70 100 130 k ? transition frequency f t v ce =-10v, i e =5ma,f=100mhz (note) 250 mhz note: transition frequency of the device utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
